Carbonated Soft Drink CSD Beer Filling Machine Line Pet Bottle Filler Sparkling Soda Water Bottling Plant Machine

Complete Carbonated Soft Drink Filling Production Line
We supply complete solution of carbonated soft drink production line from A to Z, which includs Water treatment system, Chilling system, beverage carbonating system, Automatic bottle rinsing filling capping machine, Bottle warming Tunnel, Air dryer, Automatic labeling machine, Automatic bottle packaging machine, Automatic palletizer system and the whole factory conveyor system.

Carbonated Soft Drink CSD Beer Filling Machine Line Sparkling Soda Water Bottling Plant Machine PET bottle filler equipment

Modern XGFD series of Carbonated Drink Filling Machine for filling carbonated drink contains washing, filling and capping with complete automation, suitable for filling carbonated drink into polyester bottles. It can be used for all kinds of PET bottles. The bottle neck blocking makes the process of changing bottles easily by only adjusting the height of conveyor chain. The filling process adopts the micro-pressure technology, which makes filling process faster and more stable.

1. The air feeding device is used for the bottle, and the bottle neck bottle is adopted. The bottle speed is fast and the bottle is not deformed;
2. This machine uses the advanced card bottle neck technology to avoid contact with the threaded mouth, which is more sanitary. The bottle is transported using the bottle neck technology. The bottle shape does not need to be adjusted, just change the diameter of the bottle. Guard plate;
3. Filling adopts valve lifting technology, and the filling valve adopts the new micro-pressure filling principle, which is accurate and accurate;
4. The screw cap adopts the cap screwing technology introduced by France, and the capper is selected to be installed at a low position and fed horizontally;
5. The machine is compact in structure, complete in control system, convenient in operation and high in automation.

 
Bottle Rinsing Part:
The rotary wheel is a fully SUS304 stainless steel welded structure.
The machine applies unique overturning bottle clamp, which is an innovation of our company. This bottle clamp grips bottle at neck position, avoiding bottle mouth thread contamination caused by rubber gripper block of a traditional bottle clamp. Made of SUS304 stainless steel, this bottle clamp is hygienic and durable.
The high efficiency atomizing spay nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
All sliding bushes of lifting device use Igus (Germany) anti-corrosion maintenance free bearing.
The rinser is driven by driving system positioned inside machine frame via gear transmission.
 
Bottle Filling part:
Rotary wheel fully made of stainless steel SUS 304.
Isobaric filling method.
Filling valves are made of SUS304.
Filling valves are reasonably structured with accurate filling.
Bottles go up and down in the function of cam through elevator, to process filling with contact to bottle-mouth.
Filler is driven through gears inside the machine frame.
Link-wheels in rinser, filler and capper are transported in ringed support of bottle-neck 
Bottle Capping part:
Sealing faucet (main part to control the credibility of sealing), is improved by experts with the design of alnico.
Besides the magnetic contortion variation device, there is variation dial which makes variation more easily. The benefit of this design is not only water bottling machine can set the contortion, but also it makes contortion more precise and credible, and reduces inferior. Cap distributing chute is equipped with reverse cap stop and reverse cap pick-out mechanism. Cap distributing chute is equipped with a photocell switch to stop the capper when there is no cap inside the chute. The capper is equipped with inlet bottle detection switch. Centrifugal way of cap arranging is adopted to reduce damage of caps.
A cap inspecting system is applied to control on-off of elevator.
 
The Main Machines In The Carbonated Soft Drink Production Line
     Water treatment system( Water purification system)  →  Flavor mixing system  →  Water chilling machine  →  Beverage carbonator


   3in1 Filling machine           →         Bottle warming tunnel        →     BOPP Hot glue melt labeling machine   →   Bottle packaging machine    

The Cerificate We got

Service
MODERN MACHINERY offers engineer to assist you in installing your bottling machine. Upon installation of your equipment or line, the engineer stays on-site to watch your new equipment run smoothly and train your operators. Even after our specialist leaves your plant, we are ready to give you timely, courteous service when you need it.
Our engineer offers the following services:

1. Installation of equipment or packaging line at the customer's plant
2. Coordinate schedule with mechanics to perform changeovers and preventive maintenance activities
3. Perform mechanical adjustments (if needed) on equipment and packaging line to optimize equipment's performance
4. Resolve equipment issues
5. Provide on-site training on all assigned procedures

An MODERN MACHINERY engineer will be in-charge of the equipment setup and adjustment in your plant. All of the activities will be focused on optimizing the equipment to maximize production output.
About Us
Zhangjiagang Modern Machinery Co., Ltd. is a professional beverage machinery manufacturer, specializing in water filling machine, carbonated soft drink filling machine(CSD machine) and juice production line, as well as various water treatment plant, sterilizing system, hot filling process. As one of the earliest companies engaged in beverage machinery in China.Our products not only sell well in domestic market, but also are exported to overseas countries including Russia, USA, Czech, Albania, Vietnam, Pakistan, Nigeria, Kenya, Senegal, South Africa and more than 20 different countries.

We would like to cooperate with clients to develop long-term steady business relationships.

Looking forward to hearing from you in the near future. Welcome new and old customers to contact us!

At present, we can provide the following complete sets of production lines:
1. 2,000-25,000b/h mineral water & pure water & drinking water production line
2. 2,000-24,000b/h fruit tea & fruit juice hot filling production line
3. 2,000-20,000b/h carbonated soft drink filling line
4. 100-1200b/h 5 &3 gallon water filling line
5. 1000-15000b/h wine & beer bottling line
6. 2000-20000 can filling line
Container loading